Waste Water Engineering Imhoff cone is used to measure Total solids Total organic solids Settleable solids Total in organic solids Total solids Total organic solids Settleable solids Total in organic solids ANSWER DOWNLOAD EXAMIANS APP
Waste Water Engineering The ratio of the diameter of a circular section and the side of a square section hydraulically equivalent, is 1.095 1.065 1.075 1.085 1.095 1.065 1.075 1.085 ANSWER DOWNLOAD EXAMIANS APP
Waste Water Engineering The pressure exerted by Pressure sewers are designed to be safe in tension The sewage when running full from inside, is called internal pressure The internal pressure if any, causes tensile stress in the pipe material All listed here Pressure sewers are designed to be safe in tension The sewage when running full from inside, is called internal pressure The internal pressure if any, causes tensile stress in the pipe material All listed here ANSWER DOWNLOAD EXAMIANS APP
Waste Water Engineering The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration for the areas as 30 minutes and using the formula Ps = 900/(t + 60) the maximum run off is 0.15 cumec 0.10 cumec 0.20 cumec 0.12 cumec 0.15 cumec 0.10 cumec 0.20 cumec 0.12 cumec ANSWER DOWNLOAD EXAMIANS APP
Waste Water Engineering Bio-chemical oxygen demand (BOD) for the first 20 days in generally referred to First stage demand Initial demand All of these Carbonaceous demand First stage demand Initial demand All of these Carbonaceous demand ANSWER DOWNLOAD EXAMIANS APP
Waste Water Engineering Which one of the following resists hydrogen sulphide corrosion? Glazed ware Glazed stone wares Asbestos cement R.C.C. Glazed ware Glazed stone wares Asbestos cement R.C.C. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS