Electrical Machines For power factor improvement the synchronous motor is to be heavily loaded and underexcited heavily loaded and over excited lightly loaded and over excited lightly loaded and underecited heavily loaded and underexcited heavily loaded and over excited lightly loaded and over excited lightly loaded and underecited ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 3 - Φ, 4 pole IM is supplied from a 50 Hz source. Calculate rotor frequency when rotor runs 600 rpm? 35 Hz. 20 Hz. Can be determined. 30 Hz. 35 Hz. 20 Hz. Can be determined. 30 Hz. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 400 V, 50 Hz, 30 Hp, three phase IM is drawing 50 A current at 0.8 p.f lagging. The stator and rotor copper losses are 1.5 KW and 900 W respectively. The friction and windage losses are 1050 W and core losses are 1200 W. The air gap power of the motor will be 25 kW. 24.11 kW. 26.21 kW. 23.06 kW. 25 kW. 24.11 kW. 26.21 kW. 23.06 kW. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In IM the rotor lamination can be ________________ than stator laminations. thinner. thicker. sipper. rotor can not have any laminations. thinner. thicker. sipper. rotor can not have any laminations. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Lap winding is prefered for which type of machines? high current and high voltage high current and low voltage low current and low voltage low current and high voltage high current and high voltage high current and low voltage low current and low voltage low current and high voltage ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines An 8 pole DC generator has 500 armature conductors and useful flux per pole of 0.065 Wb. What will be the emf generated if it is lap connected and runs at 1000 rpm. What must be the speed at which it is driven to produce the same emf if it is wave wound? 541.67V, 250 rpm. 2166.67V, 270 rpm. 541.67V, 200 rpm. 2166.67V, 230 rpm. 541.67V, 250 rpm. 2166.67V, 270 rpm. 541.67V, 200 rpm. 2166.67V, 230 rpm. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS