Manufacturing And Production Technology For machining a mild steel workpiece using carbide tool, the maximum material will be removed at a temperature of 50°C 100°C 275°C 175°C 50°C 100°C 275°C 175°C ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The cutting speed of a drill depends upon the Type of material to be drilled Material of drill All of these Quality of surface finish desired Type of material to be drilled Material of drill All of these Quality of surface finish desired ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 30.56 36.56 26.56 20.56 30.56 36.56 26.56 20.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology For harder alloy steel, the point angle of the drill is kept More than 118° Less than 118° Any one of these Equal to 118° More than 118° Less than 118° Any one of these Equal to 118° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The top and sides of the table of a shaper usually have L-type slots I-type slots Any one of these T-type slots L-type slots I-type slots Any one of these T-type slots ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology What is the type of welding defect caused due to shrinkage during solidification and by weld stresses called? Shrinkage void Lamellar tearing Incomplete fusion Mismatch Shrinkage void Lamellar tearing Incomplete fusion Mismatch ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS