Manufacturing And Production Technology The guide-ways are of Any one of the listed here Dovetail type Flat type V-type Any one of the listed here Dovetail type Flat type V-type ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The correct sequence of the following parameters in order of their maximum to minimum influence on tool life is Feed rate, depth of cut, cutting speed Feed rate, cutting speed, depth of cut Depth of cut, cutting speed, feed rate Cutting speed, feed rate, depth of cut Feed rate, depth of cut, cutting speed Feed rate, cutting speed, depth of cut Depth of cut, cutting speed, feed rate Cutting speed, feed rate, depth of cut ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology If the cutting speed is increased, then the built-up-edge May or may not form Becomes smaller and finally does not form at all Becomes longer Has nothing to do with speed May or may not form Becomes smaller and finally does not form at all Becomes longer Has nothing to do with speed ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is ___ cutting speed for drilling mild steel with high speed steel drills. Equal to Less than More than None of the listed here Equal to Less than More than None of the listed here ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The relief or clearance at the cutting edge of a flat drill varies from 3° to 8° 20° to 30° 60° to 90° 90° to 120° 3° to 8° 20° to 30° 60° to 90° 90° to 120° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The rake angle required to machine brass by high speed steel tool is 20° 10° 100° 0° 20° 10° 100° 0° ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS