Manufacturing And Production Technology For fast removal of materials during grinding, a ___ grinding wheel is used. None of the listed here Course grained Medium grained Fine grained None of the listed here Course grained Medium grained Fine grained ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology When 3-2-1 principle is used to support and locate a three dimensional work-piece during machining, the number of degrees of freedom that are restricted is 7 9 10 8 7 9 10 8 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A set of eight form relieved milling cutters for each module is provided to enable cutting of gears of different Types of gears Materials Number of teeth Width of gears Types of gears Materials Number of teeth Width of gears ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 20.56 30.56 36.56 26.56 20.56 30.56 36.56 26.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Carbide tipped tools usually have Any rake angle Positive rake angle Negative rake angle No rake angle Any rake angle Positive rake angle Negative rake angle No rake angle ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In oblique cutting system, the cutting edge of the tool May not clear the width of the workpiece May clear the width of the workpiece Should always clear the width of the workpiece May or may not clear the width of the workpiece May not clear the width of the workpiece May clear the width of the workpiece Should always clear the width of the workpiece May or may not clear the width of the workpiece ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS