Manufacturing And Production Technology In machining metals, surface roughness is due to All of these Cutting tool vibrations Feed marks or ridges left by the cutting tool Fragment of built-up edge on the machined surface All of these Cutting tool vibrations Feed marks or ridges left by the cutting tool Fragment of built-up edge on the machined surface ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A mandrel is used to hold None of these A thin work A heavy work An eccentric work None of these A thin work A heavy work An eccentric work ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In _________ operation, the cutting force is maximum when the tooth begins its cut and reduces it to minimum when the tooth leaves the work. Face milling Down milling Up milling End milling Face milling Down milling Up milling End milling ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In order to achieve a specific surface finish in single point turning, the most important factor to be controlled is Cutting speed Tool rake angle Depth of cut Feed Cutting speed Tool rake angle Depth of cut Feed ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In machining metal, cutting force at the cutting edge is measured by a Hydrometer Pyrometer Wattmeter Dynamometer Hydrometer Pyrometer Wattmeter Dynamometer ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The relation between the tool life (T) in minutes and cutting speed (V) in m/min is (where n = An exponent, which depends upon the tool and workpiece, and C = A constant) V/Tn = C Vn/T = C VTn = C VnT = C V/Tn = C Vn/T = C VTn = C VnT = C ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS