Power Systems Direct conversion of heat energy into electrical energy is possible through Both A and C. MHD generator. Thermal converters. Fuel or solar cell. Both A and C. MHD generator. Thermal converters. Fuel or solar cell. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which statement is not correct for the transmission line parameter R, L, G and C For each line, the conductors are characterized by σ c, μ c, εo = ε c and the homog The line parameter R,L,G and C are uniformly distributed along the entire length of the line C. At high frequencies at which most of communication system operate the internal inductance of the conductor is neglected. G = I/R. R is the AC resistance per unit length of conductor C. For each line, the conductors are characterized by σ c, μ c, εo = ε c and the homog The line parameter R,L,G and C are uniformly distributed along the entire length of the line C. At high frequencies at which most of communication system operate the internal inductance of the conductor is neglected. G = I/R. R is the AC resistance per unit length of conductor C. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Gas coolled reactor both B and C. use coolant at pressure of 14-28 Kg/cm2 and at temperature of 700°-800° c. use CO2. or helium as coolant and graphite the moderator. use heavy water as coolant as well as moderator. both B and C. use coolant at pressure of 14-28 Kg/cm2 and at temperature of 700°-800° c. use CO2. or helium as coolant and graphite the moderator. use heavy water as coolant as well as moderator. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Power system network has a total power of 5000 MW at 50 Hz supplying to the different consumers. Frequency is varying at 1.5% per change of 2% load. Assume R =0.004 Hz/MW. Find the steady state frequency deviation if a sudden loss of 200 MW occur due to tripping of one of the transmission line? -0.52 Hz 0.48 Hz 50 Hz 0.52 Hz -0.52 Hz 0.48 Hz 50 Hz 0.52 Hz ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a thermal power plant, which of its following components needs maximum maintenance attention Steam turbine. Super heater. Condenser. Boiler. Steam turbine. Super heater. Condenser. Boiler. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The positive, negative and zero sequence impedances of a transmission line are 0.5,0.5 and 1.1 pu respectively. The self (Zs) and mutual (Zm) impedances of the line will be given by Zs = 0.5 pu, Zm =0.6 pu Zs = 0.6 pu, Zm =0.5 pu Zs = 0.7 pu, Zm =0.2 pu Zs = 0.2 pu, Zm =0.7 pu Zs = 0.5 pu, Zm =0.6 pu Zs = 0.6 pu, Zm =0.5 pu Zs = 0.7 pu, Zm =0.2 pu Zs = 0.2 pu, Zm =0.7 pu ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS