Computer Networking Different computers are connected to a LAN by a cable and a/an interface card None of these special wires modem telephone lines interface card None of these special wires modem telephone lines ANSWER DOWNLOAD EXAMIANS APP
Computer Networking When data is encapsulated, which is the correct order? Data, segment, packet, frame, bit Segment, data, packet, frame, bit Data, frame, packet, segment, bit Data, segment, frame, packet, bit Data, segment, packet, frame, bit Segment, data, packet, frame, bit Data, frame, packet, segment, bit Data, segment, frame, packet, bit ANSWER DOWNLOAD EXAMIANS APP
Computer Networking If your routing table has a static, a RIP, and an IGRP route to the same network, which route will be used to route packets by default? Any available route Static route RIP route They will all load-balance. IGRP route Any available route Static route RIP route They will all load-balance. IGRP route ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which of the following is true when describing a unique local address? These are like private addresses in IPv4 in that they are not meant to be routed. These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4. These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap. Packets addressed to a unicast address are delivered to a single interface. These are like private addresses in IPv4 in that they are not meant to be routed. These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4. These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap. Packets addressed to a unicast address are delivered to a single interface. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You have the following routing table. Which of the following networks will not be placed in the neighbor routing table?R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0C 192.168.40.0/24 is directly connected, Serial0 172.16.0.0/24 is subnetted, 1 subnetsC 172.16.30.0 is directly connected, Loopback0R 192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0R 10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0C 192.168.50.0/24 is directly connected, Ethernet0 172.16.30.0 All of them will be placed in the neighbor routing table 10.0.0.0 192.168.30.0 172.16.30.0 All of them will be placed in the neighbor routing table 10.0.0.0 192.168.30.0 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? frame-relay lmi-type frame-relay arp frame-relay interface-dci frame-relay map frame-relay lmi-type frame-relay arp frame-relay interface-dci frame-relay map ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS