Mass Transfer Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. Extractive Steam Molecular Simple Extractive Steam Molecular Simple ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The rate of solid-liquid extraction is limited by the All of these Diffusion of the solute through the solvent in the pores to the outside of the particle Phase change of the solute as it dissolves in the solvent Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution All of these Diffusion of the solute through the solvent in the pores to the outside of the particle Phase change of the solute as it dissolves in the solvent Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer A mixture of 10% C₆H₆ vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. 18.7 20 27.3 21.7 18.7 20 27.3 21.7 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because Solubility of the components of air in water is very small Water has a high latent heat of evaporation They are always equal under all circumstances Lewis number is close to unity Solubility of the components of air in water is very small Water has a high latent heat of evaporation They are always equal under all circumstances Lewis number is close to unity ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Separation of two volatile liquids by distillation makes use of their Density difference Solubility Relative volatility Selectivity Density difference Solubility Relative volatility Selectivity ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raf-finate phase R containing A at xB = 0.5 and xR = 0.05 respectively. The total mass of the extract phase is (in Kg) 6.89 8.25 8.89 10 6.89 8.25 8.89 10 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS