Hydraulics and Fluid Mechanics in ME By fitting an air vessel to the reciprocating pump, there is always a saving of work done and subsequently saving of power. The saving in case of a double acting reciprocating pump is 0.884 0.848 0.488 0.392 0.884 0.848 0.488 0.392 ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME The height of a water column equivalent to a pressure of 0.15 MPa is 45.3 m 25.3 m 35.3 m 15.3 m 45.3 m 25.3 m 35.3 m 15.3 m ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. 0.34 times 0.95 times 0.81 times 0.67 times 0.34 times 0.95 times 0.81 times 0.67 times ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Multistage centrifugal pumps are used to All of these Produce high heads Give high discharge Pump viscous fluids All of these Produce high heads Give high discharge Pump viscous fluids ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Which place in hydraulic turbine is most susceptible for cavitations? Blade inlet Penstock Guide blade Inlet of draft rube Blade inlet Penstock Guide blade Inlet of draft rube ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME When a piping system is made up primarily of friction head and very little of vertical lift, then pump characteristics should be First rise and then fall Steep Horizontal Nearly horizontal First rise and then fall Steep Horizontal Nearly horizontal ANSWER DOWNLOAD EXAMIANS APP