Electrical Machines A single phase, 2 KV alternator has an armature resistance of 0.8 ohms and 4.94 ohms respectively. The voltage regulation of the alternator at 100 a load 0.8 loading power factor is 0%. 14%. 7%. 8.9%. 0%. 14%. 7%. 8.9%. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider a separately excited DC motor. If the field current is increased while the armature terminal voltage is held constant, then speed of the motor None of these. Remains same. Increase. Decrease. None of these. Remains same. Increase. Decrease. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 4 pole dc motor with armature winding resistance of 0.6 ohm receives a supply of 230 Volt. If the back emf produced during running condition is equal to 210 volt. Calculate the current flowing through the armature at this point. 33.33 Amp. 43 Amp. 44.47 Amp. 29 Amp. 33.33 Amp. 43 Amp. 44.47 Amp. 29 Amp. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In dc machines, 1. reactance voltage is proportional to armature current 2.reactance voltage is proportional to core length 3.reactance voltage is due to self-flux of the coil undergoing commutation 4. armature-cross flux is neutralized by interpolar flux 5. interpolarmmf is more than armature mmf in the interpolar zone From these, the correct answer is 1, 2, 3, 4 2, 3, 4 1, 2, 5 1, 3, 5 1, 2, 3, 4 2, 3, 4 1, 2, 5 1, 3, 5 ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In synchronous generator V curve is drawn between field current on X-axis and power factor on Y-axis. either of these. field current on Y-axis and armature current on X-axis. field current on X-axis and armature current on Y-axis. field current on X-axis and power factor on Y-axis. either of these. field current on Y-axis and armature current on X-axis. field current on X-axis and armature current on Y-axis. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines For a fault at the terminal of a synchronous generator, the fault current is maximum for a 3 - phase to ground fault. line to line fault. line to ground fault. 3 - phase fault. 3 - phase to ground fault. line to line fault. line to ground fault. 3 - phase fault. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS