A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m-xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture?

Mass Transfer
A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m-xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture?

The mixture contain optical isomers

The composition of the mixture, in percent by volume is: o-xylene 30, p-xylene 60. and m-xylene 10

The mixture exhibits an azeotrope at 101.3 kPa

The composition of the mixture in mole percent is: o-xylene 30, p-xylene 60 and m-xyoene 10

The mixture contain optical isomers

The composition of the mixture, in percent by volume is: o-xylene 30, p-xylene 60. and m-xylene 10

The mixture exhibits an azeotrope at 101.3 kPa

The composition of the mixture in mole percent is: o-xylene 30, p-xylene 60 and m-xyoene 10

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
Which is the controlling factor for a drum drier?

Neither A nor B

Heat transfer

Diffusion

Both A & B

Neither A nor B

Heat transfer

Diffusion

Both A & B

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
In liquid extraction, if the selectivity is unity, then

No separation will occur

Separation of the constituents is the most effective

Amount of solvent required will be minimum

Solvent flow rate should be very low

No separation will occur

Separation of the constituents is the most effective

Amount of solvent required will be minimum

Solvent flow rate should be very low

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
In an operating distillation column, the

Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Driving force for the liquid flow is its specific weight

Highest temperature is encountered at the top of the column

Vapors and liquids are at their dew point and bubble point respectively

Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Driving force for the liquid flow is its specific weight

Highest temperature is encountered at the top of the column

Vapors and liquids are at their dew point and bubble point respectively

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
Stacked packing compared to dumped packing

Gives higher pressure drop

Both A & B

Provides poorer contact between the fluids

Gives lower pressure drop

Gives higher pressure drop

Both A & B

Provides poorer contact between the fluids

Gives lower pressure drop

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
Steam distillation is used to

Increase the efficiency of separation

Avoid thermal decomposition of a component

Reduce the number of plates

Increase the total pressure of distillation

Increase the efficiency of separation

Avoid thermal decomposition of a component

Reduce the number of plates

Increase the total pressure of distillation

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer

Mass Transfer A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m-xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture?

Mass Transfer Which is the controlling factor for a drum drier?

Mass Transfer In liquid extraction, if the selectivity is unity, then

Mass Transfer In an operating distillation column, the

Mass Transfer Stacked packing compared to dumped packing

Mass Transfer Steam distillation is used to

Mass Transfer
A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m-xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture?

Mass Transfer
Which is the controlling factor for a drum drier?

Mass Transfer
In liquid extraction, if the selectivity is unity, then

Mass Transfer
In an operating distillation column, the

Mass Transfer
Stacked packing compared to dumped packing

Mass Transfer
Steam distillation is used to