Hydraulics and Fluid Mechanics in ME A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm. It is required to lift a weight of 1 tonne. The force required on plunger is equal tc 100 kg 1 kg 10 kg 1000 kg 100 kg 1 kg 10 kg 1000 kg ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Head developed by a centrifugal pump is Proportional to diameter and speed of impeller Proportional to diameter of impeller None of these Proportional to speed of impeller Proportional to diameter and speed of impeller Proportional to diameter of impeller None of these Proportional to speed of impeller ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Axial flow pump is started with its delivery valve Irrespective of any position Kept 50% open Kept fully open Kept fully closed Irrespective of any position Kept 50% open Kept fully open Kept fully closed ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME For very high discharge at low pressure such as for flood control and irrigation applications, following type of pump is preferred Axial flow Reciprocating Mixed flow Centrifugal Axial flow Reciprocating Mixed flow Centrifugal ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME By fitting an air vessel to the reciprocating pump, there is always a saving of work done and subsequently saving of power. This saving in case of a single acting reciprocating pump is 0.848 0.488 0.884 0.392 0.848 0.488 0.884 0.392 ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME A turbine develops 10000 kW under a head of 25 meters at 135 r.p.m. Its specific speed is 215.5 r.p.m. 175.4 r.p.m. 241.5 r.p.m. 275.4 r.p.m 215.5 r.p.m. 175.4 r.p.m. 241.5 r.p.m. 275.4 r.p.m ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS