Workshop Technology A hacksaw blade cuts on the Return stroke Cutting depends upon the direction of force Both forward and return strokes Forward stroke Return stroke Cutting depends upon the direction of force Both forward and return strokes Forward stroke ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a ___, the molten metal is poured and allowed to solidify while the mould is revolving. Permanent mould casting method Slush casting method Centrifugal casting method Die casting method Permanent mould casting method Slush casting method Centrifugal casting method Die casting method ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Lap joints are employed on plates having thickness 5 to 10 mm Above 25 mm Less than 3 mm 12.5 mm 5 to 10 mm Above 25 mm Less than 3 mm 12.5 mm ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a hot chamber die casting machine Ferrous alloys with high melting temperature are casted Nonferrous alloys with low melting temperature are casted Ferrous alloys with low melting temperature are casted Nonferrous alloys with high melting temperature are casted Ferrous alloys with high melting temperature are casted Nonferrous alloys with low melting temperature are casted Ferrous alloys with low melting temperature are casted Nonferrous alloys with high melting temperature are casted ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The draft or taper allowance on casting is generally 2 to 5 mm/m 5 to 10 mm/m 1 to 2 mm/m 10 to 15 mm/m 2 to 5 mm/m 5 to 10 mm/m 1 to 2 mm/m 10 to 15 mm/m ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Shift is a casting defect which Results in a mismatching of the top and bottom parts of a casting Results in general enlargement of a casting Occurs as sand patches on the upper surface of a casting Occurs near the ingates as rough lumps on the surface of a casting Results in a mismatching of the top and bottom parts of a casting Results in general enlargement of a casting Occurs as sand patches on the upper surface of a casting Occurs near the ingates as rough lumps on the surface of a casting ANSWER DOWNLOAD EXAMIANS APP