Workshop Technology In shielded arc welding Large electrode is used None of the listed here Welding rod coated with slag is used Welding rod coated with fluxing material is used Large electrode is used None of the listed here Welding rod coated with slag is used Welding rod coated with fluxing material is used ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Seam welding is best adopted for metal thickness ranging from 3 to 5 mm 8 to 10 mm 5 to 8 mm 0.025 to 3 mm 3 to 5 mm 8 to 10 mm 5 to 8 mm 0.025 to 3 mm ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology A taper provided on the pattern for its easy and clean withdrawal from the mould is known as Machining allowance Distortion allowance Draft allowance Shrinkage allowance Machining allowance Distortion allowance Draft allowance Shrinkage allowance ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a ___ two or more operations are performed simultaneously at the single stroke of the ram. Compound die Progressive die Simple die Combination die Compound die Progressive die Simple die Combination die ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In backhand welding, the angle between the welding torch and the work is kept as 40°-50° 60°-70° 50°-60° 30°-40° 40°-50° 60°-70° 50°-60° 30°-40° ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness less than 5 mm, its edges Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on one side Do not require bevelling Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on one side Do not require bevelling Should have a double-V or U-groove on both sides ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS