Workshop Technology The consumable electrode is used in Carbon arc welding TIG arc welding MIG arc welding Submerged arc welding Carbon arc welding TIG arc welding MIG arc welding Submerged arc welding ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a ___ two or more operations are performed simultaneously at the single stroke of the ram. Progressive die Combination die Compound die Simple die Progressive die Combination die Compound die Simple die ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In electric resistance welding, voltage required for heating is 50 to 100 volts 1 to 5 volts 11 to 20 volts 6 to 10 volts 50 to 100 volts 1 to 5 volts 11 to 20 volts 6 to 10 volts ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a four high rolling mill, there are four rolls out of which Two are working rolls and two are backing up rolls Three are working rolls and one is backing up roll One is working roll and three are backing up rolls All of the four are working rolls Two are working rolls and two are backing up rolls Three are working rolls and one is backing up roll One is working roll and three are backing up rolls All of the four are working rolls ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology If an aluminium pattern made from a wooden master pattern is to be used for grey iron castings, then the shrinkage allowance allowed on the wooden pattern should be 26 mm/m 20 mm/m 16 mm/m 10 mm/m 26 mm/m 20 mm/m 16 mm/m 10 mm/m ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Tandem drawing of wires and tubes is necessary because Surface finish improves after every drawing stage Annealing is needed between stages Accuracy in dimensions is not possible otherwise It is not possible to reduce at one stage Surface finish improves after every drawing stage Annealing is needed between stages Accuracy in dimensions is not possible otherwise It is not possible to reduce at one stage ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS