Manufacturing And Production Technology A grinding wheel becomes glazed (i.e. cutting edge takes a glass-like appearance) due to Wear of bond Breaking of abrasive grains Cracks on grinding wheel Wear of abrasive grains Wear of bond Breaking of abrasive grains Cracks on grinding wheel Wear of abrasive grains ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In an interchangeable assembly, shafts of size 25.000 -0.0100⁺⁰∙⁰⁴⁰ mm mate with holes of size 25.000 -0.010⁺⁰∙⁰²⁰ mm. The maximum possible clearance in the assembly will be 30 microns 20 microns 10 microns 60 microns 30 microns 20 microns 10 microns 60 microns ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A fixture is defined as a device which Holds and locates a workpiece during an inspection or for a manufacturing operation All of these Is used to check the accuracy of workpiece Holds and locates a workpiece and guides and controls one or more cutting tools Holds and locates a workpiece during an inspection or for a manufacturing operation All of these Is used to check the accuracy of workpiece Holds and locates a workpiece and guides and controls one or more cutting tools ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In a shaper Tool moves over reciprocating work Tool is stationary and work reciprocates Work is stationary and tool reciprocates Tool moves over stationary work Tool moves over reciprocating work Tool is stationary and work reciprocates Work is stationary and tool reciprocates Tool moves over stationary work ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A bottoming tap has Its end tapered for about three or four threads Full threads for the whole of its length Its end tapered for about eight or ten threads None of these Its end tapered for about three or four threads Full threads for the whole of its length Its end tapered for about eight or ten threads None of these ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In order to have interference fit, it is essential that the lower limit of the shaft should be Lesser than the lower limit of the hole Greater than the upper limit of the hole Greater than the lower limit of the hole Lesser than the upper limit of the hole Lesser than the lower limit of the hole Greater than the upper limit of the hole Greater than the lower limit of the hole Lesser than the upper limit of the hole ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS