Workshop Technology A gimlet is a ________ tool. Marking Boring Cutting None of these Marking Boring Cutting None of these ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology When the dimension is expressed as, then the tolerance is 0.06 mm 0.01 mm 0.035 mm 0.025 mm 0.06 mm 0.01 mm 0.035 mm 0.025 mm ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a compound die Both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram Two or more operations are performed simultaneously at the single stroke of the ram Only one operation is performed at each stroke of the ram Two or more cutting operations are performed at one station of the press in every stroke of the ram Both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram Two or more operations are performed simultaneously at the single stroke of the ram Only one operation is performed at each stroke of the ram Two or more cutting operations are performed at one station of the press in every stroke of the ram ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For arc welding Any one of these Alternating current with low frequency is used Direct current is used Alternating current with high frequency is used Any one of these Alternating current with low frequency is used Direct current is used Alternating current with high frequency is used ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The teeth of hacksaw blade are bent Towards right Alternately towards right and left and every third or fourth left straight Towards left May be bent in any direction Towards right Alternately towards right and left and every third or fourth left straight Towards left May be bent in any direction ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The temperature produced by oxy-hydrogen flame is about 1800°C 2400°C 2100°C 3200°C 1800°C 2400°C 2100°C 3200°C ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS