Power Systems A 60 Hz, 320 Km loss less line has sending end voltage 1.0 pu. The receiving end voltage on no-load is 1.088 pu. none of these. 1.116 pu. 1.1 pu. 1.088 pu. none of these. 1.116 pu. 1.1 pu. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The per unit impedance Z(pu) is given by ZΩ* (kVA)b/(KV)²b ZΩ* (MVA)b/(KV)²b ZΩ* (MVA)b/((KV)²b *100) ZΩ* (MVA)b*100/(KV)²b ZΩ* (kVA)b/(KV)²b ZΩ* (MVA)b/(KV)²b ZΩ* (MVA)b/((KV)²b *100) ZΩ* (MVA)b*100/(KV)²b ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following is/are the advantages of synchronous phase modifier over the shunt compensation? initial cost is low single unit can be used as both capacitance and inductor by adjusting the excitation both 1 and 2 smooth voltage regulation is possible by controlling excitation initial cost is low single unit can be used as both capacitance and inductor by adjusting the excitation both 1 and 2 smooth voltage regulation is possible by controlling excitation ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power station supplies the peak load of 50 MW, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55 the maximum demand on the station and average load respectively will be 51.61 MW. 57.5 MW. 52 MW. 53 MW. 51.61 MW. 57.5 MW. 52 MW. 53 MW. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The sequence components of the fault current are as follows: IR1 = j1.5 pu, IR2 = -j0.5 pu, IR0 = -j1. The type of fault is LLG LLL LG LL LLG LLL LG LL ANSWER DOWNLOAD EXAMIANS APP
Power Systems For 132 kV system, the reactance and capacitance up to the location of the CB is 3 Ω and 0.015 μF respectively. The maximum value of RRRV is 9.01 kV / μs. 10.01 kV / μs. 12.2 kV / μs. 2.0 kV / μs. 9.01 kV / μs. 10.01 kV / μs. 12.2 kV / μs. 2.0 kV / μs. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS