Power Systems A 3 layer and diameter of each strand is d, then find the total diameter of ACSR conductor? 3d d 2d 5d 3d d 2d 5d ANSWER DOWNLOAD EXAMIANS APP
Power Systems Resistance switching in normally employed in bulk oil breakers. air blast circuit breaker. minimum oil breakers. all breakers. bulk oil breakers. air blast circuit breaker. minimum oil breakers. all breakers. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Ships are usually supplied power by None of above. Hydraulic turbine. Steam accumulator. Diesel engine. None of above. Hydraulic turbine. Steam accumulator. Diesel engine. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 50 Hz, 17.32 kV generator is connected to a power system. The system reactance and capacitance per phase are 10 mH and 0.2 mF respectively. What is the maximum voltage across the contacts of the circuit breaker at an instant when it passes through zero? 30.28 kV 29.28 kV 28.28 kV 31.28 kV 30.28 kV 29.28 kV 28.28 kV 31.28 kV ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the frequency is increased, then skin effect will decreases any of the above remains unaffected increases decreases any of the above remains unaffected increases ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 0 MW and PG2 = 250 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 250 MW and PG2 = 0 MW ANSWER DOWNLOAD EXAMIANS APP