Windows 2000 Server
Your Windows 2000 Server computer includes an integrated 10-MB Ethernet adapter. You are replacing the integrated adapter with a new 100-MB Ethernet adapter. You install the new adapter in an available PCI slot. When you restart the computer, you receive error messages in the System log stating that the new adapter Is missing or is not working. What should you do to resolve the problem?

Create a new hardware profile
None of above
Delete the device driver for the integrated 10-MB Ethernet adapter from the Systemrootsystem32Driver Cache folder
Use Device Manager to disable the integrated 10-MB Ethernet adapter
Use Device Manager to remove the integrated 10-MB Ethernet adapter

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
Your network contains NetWare 4.0 Servers. You have successfully installed Client Service for NetWare on Windows 2000 Professional computers, and Gateway Service for NetWare on Windows 2000 Server Computers. You recently added a new Windows 2000 Server computer to the network and installed Gateway Service for NetWare on it. However, the server is unable to connect to any NetWare servers. What should you do on the new Windows 2000 Server computer to resolve this problem?

Enable NWLink NetBIOS
Configure the NWLink IPX/SPX/ NetBIOS Compatible Transport Protocol to use the correct Ethernet frame type
None of above.
Install RIP routing for IPX
Install the SAP Agent

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
Your network contains 10 domain controllers, 10 member servers, and approximately 1,000 client computers. All the servers run Windows 2000 Server, and all the client computers run Windows 2000 Professional. Two of the domain controllers act as DNS servers. Users of client computers use file sharing to grant access to files stored locally. The network has 10 subnets and uses TCP/IP as the only network protocol. You want to configure the network so that all computers can resolve the addresses of all other computers by using DNS. Client computers must be able to register and resolve addresses if a server fails. How should you configure the DNS servers?

Configure one server with a standard primary zone for the domain, and configure at least one server with an Active Directory integrated primary zone
Configure at least two servers with Active Directory integrated primary zones for the domain
Configure one server with an Active directory integrated primary zone for the domain, and configure at least one server with a standard secondary zone
Configure one server with a standard primary zone for the domain, and configure at least one server with standard secondary zone
Configure at least two servers with standard primary zones for the domain

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are the administrator of Windows 2000 Server computer. Your computer has a span volume that consists of areas on three physical hard disks on the server. The three disks support hot swapping. You regularly backup the span volume by using windows backup. One of the disk fail, you replace the disk with a new un-partitioned disk. You want to recover the span volume and disk data as soon as possible. What should you do?

Extend the span volume to include the new disk, shut down and restart the server, use windows backup to restore the data
Re scan the disk, format the span volume. Use windows back up to restore the data
Extend the span volume to include the new disk, rescan the disk
Re scan the disk, extend the span volume to include the new disk. Shut down and restart the server, use windows backup to restore the new data
Re scan the disk, remove the span volume and create a new span volume that includes the new disk. Format the span volume, use Windows back up to restore the data

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You install the Routing and Remote Access service on a Windows 2000 Server computer in your network. Your network is not directly connected to the Internet and uses the private IP address range 192.168.0.0. When you use Routing and Remote Access to dial in to the server, your computer connects successfully, but you are unable to access any resources. When you try to piiig servers by using their IP addresses, you receive the following message: "Request timed out." When you run the ipconfig command, it shows that your dial-up connection has been given the IP address 169.254.75.182. What should you do to resolve the problem?

Configure the remote access server with the address of a DHCP server
Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet
Authorize the remote access server to receive multiple addresses from a DHCP server
None of above
Configure the remote access server to act as a DHCP Relay Agent

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You have just configured two Windows NT Servers, Monitor 1 and Monitor 2 with no other software installed. You have an application server that needs to be monitored for performance to figure out what it's problem is, or to get some kind of baseline. You install Network Monitor on Monitor 2. What would you do to monitor Application server?

Configure Monitor 2 and Application server as monitoring partners (or something) to monitor the performance
Configure the network monitor ECP port something for TCP
Configure the network monitor EDP port something for UDP
Install Network Monitor on Monitor 1
Install Network Monitor on Application Server

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows 2000 Server