Windows NT
You want to connect 2 networks that are both lOBaseT Ethernet networks. The 2 networks are located in separate buildings so that they are approximately 1,000 meters apart. Which media should you use?

wireless infrared
RG-58 A/U Coaxial Cable
fiber-optic cable
Type 1 STP Cable
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
Peter uses a Microsoft Windows 95 computer. What should he do to be able to administer domain user accounts from his computer?

install Windows NT Server on his computer
install the Client-based Network Administration Tools on his computer
None of these
install Windows NT Workstation on his computer
install User Manager for Domains on his computer

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
A company has a department that consists of 15 engineers. The engineers have data that needs to be accessible only to their own team. The department continually has engineers arriving and departing, and it is difficult to identify a single administrator for the department Which model would be the best for this situation?

A single domain mode, with all data kept on the controller for the domain
None of these
A master domain mode, with each engineer trusting the master domain and the data stored on the server
A workgroup mode, with each engineer administering his or her own computer
A complete trust mode, with each engineer's computer trusting the other engineer's computers

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

4
2
10
None of these
5

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?

malfunctioning repeater
incorrect termination of the destination network
None of these
incorrect subnet mask on your client computer
defective network adapter in the router

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?

None of these
RJ-45
RG-58 AU
RG-59 AU
RJ-11

ANSWER DOWNLOAD EXAMIANS APP