Windows NT
You are adding a new server to your network. The network uses TCP/IP. The new server will provide users with dial-up access to network resources. The data link communications protocol you choose for dial-up access must allow you to provide secure authentication. Which protocol should you choose?

In the System option in Control Panel, select the setting that allows users to log on locally
PPP
DLC
In the System option in Control Panel, set the user environment variables to allow Maria to log on locally
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

4
None of these
5
2
10

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
Why does a high number of broadcast messages adversely affect overall network performance?

None of these
No computer on the network can transmit data until each broadcast message has been acknowledged by every computer on the network
Every computer on the network must process each broadcast message
Broadcast messages are automatically routed to every segment of a LAN
Each broadcast message requires an acknowledgement packet from every computer on the network

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
A company has a department that consists of 15 engineers. The engineers have data that needs to be accessible only to their own team. The department continually has engineers arriving and departing, and it is difficult to identify a single administrator for the department Which model would be the best for this situation?

None of these
A single domain mode, with all data kept on the controller for the domain
A master domain mode, with each engineer trusting the master domain and the data stored on the server
A complete trust mode, with each engineer's computer trusting the other engineer's computers
A workgroup mode, with each engineer administering his or her own computer

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows NT