Windows NT
You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to share the existing conduit with telephone cable, and cable segments will be up to 135 meters in length. Which cable is best suited to this installation?

Category 1 UTP
Fiber Optic
Thicknet Coaxial
Category 3 UTP
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
What must you do to create a printer pool containing four shared printers on your Windows NT Server computer?

Set up all printers as network-interface printer devices
Set individual printer properties for each printer
Set up all the printers to share the same parallel port
None of these
Specify the same printer driver and settings for all printers

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
Several college interns are working at your company for the summer. You want to increase security by monitoring all user logons. How must you do this?

Use the Services option in Control Panel to start the Alerter service to audit logon attempts
None of these
Use server Manager to set an Audit policy for all logon attempts to be on the user's assigned computer only
Use Performance Monitor to create a log of all logon attempts
Use User Manager for Domains to set an Audit policy for all logon attempts

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

10
2
4
5
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?

defective network adapter in the router
incorrect subnet mask on your client computer
malfunctioning repeater
incorrect termination of the destination network
None of these

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows NT