Heat Transfer With increase in the distance between the heat source and the object receiving the heat, the radiation heat transfer Increases Remains unaffected Increases exponentially Decreases Increases Remains unaffected Increases exponentially Decreases ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In a laboratory test run, the rate of drying was found to be 0.5 x 10-3 kg/m².s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m²/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is 2000 5000 6000 4000 2000 5000 6000 4000 ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In an extended surface heat exchanger, fluid having lower co-efficient Can flow either inside or outside the tubes Should not be used as it gives very high pressure drop Flows through the tube Flows outside the tubes Can flow either inside or outside the tubes Should not be used as it gives very high pressure drop Flows through the tube Flows outside the tubes ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer Stefan-Boltzman law applies to __________ body None of the listed here white black grey None of the listed here white black grey ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In a shell and tube heat exchanger, floating head is used for Large temperature differentials Less corrosion of tubes High heat transfer co-efficient Low pressure drop Large temperature differentials Less corrosion of tubes High heat transfer co-efficient Low pressure drop ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer With increase in temperature, the thermal conductivity of non-metallic amorphous solids decreases None of the listed here remains same increases decreases None of the listed here remains same increases ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS