Automation System Which technique enables the designer to mold and shape, rather than construct on object using a series of lines? Surface modeling Wire-frame modeling Solid modeling FEM (Finite Element Modeling) None of these Surface modeling Wire-frame modeling Solid modeling FEM (Finite Element Modeling) None of these ANSWER DOWNLOAD EXAMIANS APP
Automation System Which of the following editor(s) is(are) incorporated into general CAD system? None of these Macro and symbol Editor All of these Point Editor Line Editor None of these Macro and symbol Editor All of these Point Editor Line Editor ANSWER DOWNLOAD EXAMIANS APP
Automation System One of the major benefits of using CAD in tool design is that: tool motions can be checked to see if there is interference between the tool and the object it simplifies the trial-and-error method there is better coordination in the materials-handling area None of these product design represents approximately one-half the engineering costs tool motions can be checked to see if there is interference between the tool and the object it simplifies the trial-and-error method there is better coordination in the materials-handling area None of these product design represents approximately one-half the engineering costs ANSWER DOWNLOAD EXAMIANS APP
Automation System In the operation of a programmable controller: None of these All of these mathematics cannot be performed any latched data must be done using an external latching relay all of the logic status is maintained in memory None of these All of these mathematics cannot be performed any latched data must be done using an external latching relay all of the logic status is maintained in memory ANSWER DOWNLOAD EXAMIANS APP
Automation System Most continuous control actuators: are of the time proportioning type use a 4 to 20 mA current loop input are used with standard continuous control loop (b) and (c) above None of these are of the time proportioning type use a 4 to 20 mA current loop input are used with standard continuous control loop (b) and (c) above None of these ANSWER DOWNLOAD EXAMIANS APP
Automation System The "walk-through" method of programming a robot involves: walking through your suggested procedure with your supervisor prior to programming moving the robot from one location to another physically moving the robot through all the motions it is to repeat All of these None of these walking through your suggested procedure with your supervisor prior to programming moving the robot from one location to another physically moving the robot through all the motions it is to repeat All of these None of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS