Measurement and Instrumentation Which of the quantity consists of SI unit as Candela? Luminous intensity Impulse Velocity Force Luminous intensity Impulse Velocity Force ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Commonly used standard capacitor is Concentric cylindrical type Multiplate parallel plate type Spherical type Electrostatic type Concentric cylindrical type Multiplate parallel plate type Spherical type Electrostatic type ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation With a sweep time 10ms across the screen the approx. horizontal sawtooth frequency will be 100Hz 500Hz 50Hz 1kHz 100Hz 500Hz 50Hz 1kHz ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The total current I = I1 + I2 in a circuit is measured I1 = 150 ± 3A , I2 = 250 ± 4 A, where the limits of error are given as standard deviations. I is measured as (400 ±5) A (400 ± 1) A (400 ± 3) A (400 ± 2.24) A (400 ±5) A (400 ± 1) A (400 ± 3) A (400 ± 2.24) A ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of emf 1.18 V obtains balances at 600 mm. A test cell is seen to obtain balance at 680 mm. The emf of test cell is 1.5 V. 1.34 V. 1.7 V. 1 V. 1.5 V. 1.34 V. 1.7 V. 1 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 10 mA. 1mA. 100 mA. 0.5 mA. 10 mA. 1mA. 100 mA. 0.5 mA. ANSWER DOWNLOAD EXAMIANS APP