Measurement and Instrumentation Which of following statement are correct in case of power factor meter? The restoring torque is provided by a controlling torque. The deflection is proportional to phase angle between field coil and crossed coil. Both B and C. It consist of two coils mounted at right angles to each other. The restoring torque is provided by a controlling torque. The deflection is proportional to phase angle between field coil and crossed coil. Both B and C. It consist of two coils mounted at right angles to each other. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A galvanometer has Spring coil damping Eddy current damping Air friction damping Fluid friction damping Spring coil damping Eddy current damping Air friction damping Fluid friction damping ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistor of 10kΩhms with 5% tolerance is connected in parallel with a 5kΩhms resistor of 10% tolerance. What is the tolerance limit for the parallel network? 6.67% 8.33% 5% 10% 6.67% 8.33% 5% 10% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When using ohmmeter, applied voltage is to be disconnected from the circuit because Current will decrease resistance The ohmmeter has its own internal battery Voltage source will increase resistance None of these Current will decrease resistance The ohmmeter has its own internal battery Voltage source will increase resistance None of these ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a wheatstone bridge, a change of 6 Ω in the unknown arm of bridge is required to produce a change in deflection of 2.4 mm of the galvanometer. The sensitivity is 5.0 mm/Ω 0.8 mm/Ω 0.4 mm/Ω 2.5 mm/Ω 5.0 mm/Ω 0.8 mm/Ω 0.4 mm/Ω 2.5 mm/Ω ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which meter is suitable for the measurement of 10mV at 50MHz? VTVM CRO Moving coil voltmeter Moving iron voltmeter VTVM CRO Moving coil voltmeter Moving iron voltmeter ANSWER DOWNLOAD EXAMIANS APP