Measurement and Instrumentation A high frequency AC signal is applied to a PMMC instrument. The RMS value of the AC signal is 2V, the reading of the instrument is Zero. 2V. √2V. 2√2V. Zero. 2V. √2V. 2√2V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving iron ammeter produces a full scale torque of 240 μNm with a deflection of 120° at a current of 10 A. The rate of change of self induction (μH/radian) of the instrument at full scale is 12.0 μH/radian. 114.6 μH/radian. 2.0 μH/radian. 4.8 μH/radian. 12.0 μH/radian. 114.6 μH/radian. 2.0 μH/radian. 4.8 μH/radian. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistance is measured by the voltmeter-ammeter method employing dc excitation and a voltmeter of very high resistance connected directly across the unknown resistance. If the voltmeter and ammeter reading are subject to maximum possible errors of ± 2.4 % and ± 1.0 % respectively, then the magnitude of the maximum possible percentage error in the value of resistance deduced from the measurement is nearly ± 1.4% ± 2.4% ± 3.4% ± 1% ± 1.4% ± 2.4% ± 3.4% ± 1% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging Pressure coil of the wattmeter will become ineffective. One of the wattmeters will read zero One of the wattmeter connections will have to be reversed Both give the same readings Pressure coil of the wattmeter will become ineffective. One of the wattmeters will read zero One of the wattmeter connections will have to be reversed Both give the same readings ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A 0 - 200 V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by this instrument is 50 V. What is the limiting error? 4% 2% 3% 5% 4% 2% 3% 5% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The resistance of a circuit is measured from the relation R= P/I2, where P is the power fed into the circuit and I is the current flowing through it. If the limiting errors in the measurement of power and current are respectively ± 1.0% and ± 1.0%, then what will be the limiting error in measurement of resistance ? ± 1.5% ± 3.0% ±0.5% ±3.5% ± 1.5% ± 3.0% ±0.5% ±3.5% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS