Engineering Materials When a steel containing __________ 0.8% carbon is cooled slowly below the lower critical point, it consists of ferrite and pearlite. Equal to Less than More than None of these Equal to Less than More than None of these ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Alnico, an alloy used extensively for permanent magnets contains iron, nickel, aluminium and cobalt in the following ratio 30 : 20 : 30 : 20 50 : 20 : 20 : 10 40 : 30 : 20 : 10 50 : 20 : 10 : 20 30 : 20 : 30 : 20 50 : 20 : 20 : 10 40 : 30 : 20 : 10 50 : 20 : 10 : 20 ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Large forgings, crank shafts, axles normally contain carbon up to 0.45 to 0.55% 0.05 to 0.20% 0.20 to 0.45% 0.55 to 1.0% 0.45 to 0.55% 0.05 to 0.20% 0.20 to 0.45% 0.55 to 1.0% ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The percentage of carbon in grey iron castings usually varies between 0.012 5 to 7% 2.5 to 4.5% 0.5 to 1% 0.012 5 to 7% 2.5 to 4.5% 0.5 to 1% ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials When low carbon steel is heated up to upper critical temperature The average grain size is a minimum The grain size first increases and then decreases very rapidly There is no change in grain size The grain size increases very rapidly The average grain size is a minimum The grain size first increases and then decreases very rapidly There is no change in grain size The grain size increases very rapidly ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials In a hardening process, the hypo-eutectoid steel is Heated from 30°C to 50°C above the upper critical temperature and then cooled in still air Heated below or closes to the lower critical temperature and then cooled slowly Heated from 30°C to 50°C above the upper critical temperature and then cooled suddenly in a suitable cooling medium Heated from 30°C to 50°C above the upper critical temperature and then cooled slowly in the furnace Heated from 30°C to 50°C above the upper critical temperature and then cooled in still air Heated below or closes to the lower critical temperature and then cooled slowly Heated from 30°C to 50°C above the upper critical temperature and then cooled suddenly in a suitable cooling medium Heated from 30°C to 50°C above the upper critical temperature and then cooled slowly in the furnace ANSWER DOWNLOAD EXAMIANS APP