Electrical Machines What is the actual arrangement of series wound generator? Armature and field both are in series with the load. Armature winding is in series with load. Armature and field both are parallel. Armature and field both are connected. Armature and field both are in series with the load. Armature winding is in series with load. Armature and field both are parallel. Armature and field both are connected. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements about commutating poles which are fitted on most large dc Shunt motors: 1. The commutating poles are placed in the geometric neutral plane and their number is usually Equal to the number of main poles 2. The winding on the commutating poles is connected in series with the shunt-field winding on the main poles 3. The polarity of the commutating pole must be that of the next pole further ahead 4. The commutating poles neutralize the reactance voltage produced in the coil undergoing Commutation. Of these statements, 2, 3 and 4 are correct 1, 2 and 4 are correct 1, 2 and 3 are correct 1 and 4 are correct 2, 3 and 4 are correct 1, 2 and 4 are correct 1, 2 and 3 are correct 1 and 4 are correct ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The wound rotor type IM is used for____________ speed operation. maximum. minimum. constant. variable. maximum. minimum. constant. variable. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 4 pole dynamo with wave wound armature has 51 slots contains 20 conductors in each slot. If induced emf 357 Volts and speed is 8500 rpm, flux per pole will be 1.2 mWb. 1.4 mWb. 2.7 mWb. 3.5 mWb. 1.2 mWb. 1.4 mWb. 2.7 mWb. 3.5 mWb. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Current in a coil undergoing commutation is not able to get reversed completely by the end of commutation period. It is due to reactance voltage induced in the coil. armature emf. coil resistance. None of these reactance voltage induced in the coil. armature emf. coil resistance. None of these ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 3-phase, 50 Hz, 4 pole induction motor is running at 1440 rpm. Find the rotor efficiency? 92% 94% 96% 95% 92% 94% 96% 95% ANSWER DOWNLOAD EXAMIANS APP