Measurement and Instrumentation What are the SI units of mass, length and time respectively? kg, m and s. kg, cm and s. g, m and s. g, cm and s. kg, m and s. kg, cm and s. g, m and s. g, cm and s. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The scale of a rectifier instrument is None of the listed here Non-linear Linear Either linear or non linear None of the listed here Non-linear Linear Either linear or non linear ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The meter constant of a single phase 240 V induction watthour meter is 400 revolutions per KWh. The speed of the meter disc for a current of 10 Amperes of 0.8 p.f lagging will be 21.1 rpm. 12.8 rpm. 16.02 rpm. 18.2 rpm. 21.1 rpm. 12.8 rpm. 16.02 rpm. 18.2 rpm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 15 V. 12.6 V. 11.1 V. 10.6 V. 15 V. 12.6 V. 11.1 V. 10.6 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Potentiometer method of DC voltage measurement is more accurate than direct measurement using a voltmeter because It loads the circuit moderately. It loads the circuit to maximum extent. It uses centre zero galvanometer instead of voltmeter. It does not load the circuit at all. It loads the circuit moderately. It loads the circuit to maximum extent. It uses centre zero galvanometer instead of voltmeter. It does not load the circuit at all. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which of the following is a variable displacement transducer? synchros tachometer potentiometer None of these synchros tachometer potentiometer None of these ANSWER DOWNLOAD EXAMIANS APP