Measurement and Instrumentation The internal resistance of Weston standard cell is of order of 10 ohm. 100 ohm. 1000 ohm. 1 ohm. 10 ohm. 100 ohm. 1000 ohm. 1 ohm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving coil of a meter has 100 turns, and a length and depth of 10 mm and 20 mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carries a current of 50 mA. The torque on the coil is 100 µNm. 200 µNm. 1 µNm. 2 µNm. 100 µNm. 200 µNm. 1 µNm. 2 µNm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The resistance of a circuit is measured from the relation R= P/I2, where P is the power fed into the circuit and I is the current flowing through it. If the limiting errors in the measurement of power and current are respectively ± 1.0% and ± 1.0%, then what will be the limiting error in measurement of resistance ? ± 3.0% ±0.5% ±3.5% ± 1.5% ± 3.0% ±0.5% ±3.5% ± 1.5% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Why is a MISC meter not recommended for DC measurement? The meter does not respond to DC signals The meter is calibrated for AC and it’s error for DC would be high The error is high due to eddy current effect The error is high due to hysteresis effect The meter does not respond to DC signals The meter is calibrated for AC and it’s error for DC would be high The error is high due to eddy current effect The error is high due to hysteresis effect ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 12.6 V. 15 V. 10.6 V. 11.1 V. 12.6 V. 15 V. 10.6 V. 11.1 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A PMMC instrument can be used as flux meter By using a low resistance shunt By using a high series resistance By making control springs of large moment of inertia By eliminating the control springs By using a low resistance shunt By using a high series resistance By making control springs of large moment of inertia By eliminating the control springs ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS