Transformers Two things which are same for primary and secondary of transformer are ______ None of the listed here Resistance and leakage reactances Currents and induced voltages Ampere turns and voltage per turns None of the listed here Resistance and leakage reactances Currents and induced voltages Ampere turns and voltage per turns ANSWER DOWNLOAD EXAMIANS APP
Transformers If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding, what is the reflective resistance if the secondary load resistance is 250 ? 62500 Ω 6250 Ω 25 Ω 250 Ω 62500 Ω 6250 Ω 25 Ω 250 Ω ANSWER DOWNLOAD EXAMIANS APP
Transformers If 25 W of power are applied to the primary of an ideal transformer with a turns ratio of 10, the power delivered to the secondary load is 0 W 2.5 W 250 W 25 W 0 W 2.5 W 250 W 25 W ANSWER DOWNLOAD EXAMIANS APP
Transformers In case of 3-phase induction motors, plugging means locking of rotor due to harmonics starting the motor on load which is more than the rated load pulling the motor directly on line without a starter interchanging two supply phases for quick stopping locking of rotor due to harmonics starting the motor on load which is more than the rated load pulling the motor directly on line without a starter interchanging two supply phases for quick stopping ANSWER DOWNLOAD EXAMIANS APP
Transformers The output current corresponding to the maximum efficiency for a transformer having core loss of 200 W and equivalent resistance referred to secondary of 0.5 Ω is 20 A 10 A 15 A 5 A 20 A 10 A 15 A 5 A ANSWER DOWNLOAD EXAMIANS APP
Transformers Burden of a current transformer is usually expressed in Amperes Volts Kilowatt Volt amperes Amperes Volts Kilowatt Volt amperes ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS