Control Systems To achieve the optimum transient response, the indicating instruments are so designed as to provide damping which is slightly less than the critical value. provide damping which is slightly more than the critical value. be critically damped. be undamped. provide damping which is slightly less than the critical value. provide damping which is slightly more than the critical value. be critically damped. be undamped. ANSWER DOWNLOAD EXAMIANS APP
Control Systems When compared to a 1st order LPF, a 2nd order LPF has higher voltage gain. faster drop in filter response. higher cut off frequency. lower voltage gain. higher voltage gain. faster drop in filter response. higher cut off frequency. lower voltage gain. ANSWER DOWNLOAD EXAMIANS APP
Control Systems Sparking between the contacts can be reduced by inserting a capacitor in series with the contacts. a resistor in the line. a reactor in the line. a capacitor in parallel with the contacts. a capacitor in series with the contacts. a resistor in the line. a reactor in the line. a capacitor in parallel with the contacts. ANSWER DOWNLOAD EXAMIANS APP
Control Systems Slope of asymptote in Bode plot of 2nd order system is _____________________ per octave. 3 dB 6 dB 18 dB 12 dB 3 dB 6 dB 18 dB 12 dB ANSWER DOWNLOAD EXAMIANS APP
Control Systems Time response for a second order control system depends on value of ξ. If ξ>1 then the system is called as over damped system. under damped system. critically damped system. undamped system . over damped system. under damped system. critically damped system. undamped system . ANSWER DOWNLOAD EXAMIANS APP
Control Systems The angle condition used for checking whether any point lies on root locus or not is........... ± (2q) 360o. ± (2q) 180o. ± (2q + 1) 360o. ± (2q + 1) 180o. ± (2q) 360o. ± (2q) 180o. ± (2q + 1) 360o. ± (2q + 1) 180o. ANSWER DOWNLOAD EXAMIANS APP