Automation System The workspace required for a robot: is not dependent on the application. depends upon the robot used is less than that of a human performing the same task must be enclosed by a fence None of these is not dependent on the application. depends upon the robot used is less than that of a human performing the same task must be enclosed by a fence None of these ANSWER DOWNLOAD EXAMIANS APP
Automation System The two types of relays in a PC are: a control relay and a retentive relay a retentive relay and a non-retentive relay None of these All of these an output relay and a control relay a control relay and a retentive relay a retentive relay and a non-retentive relay None of these All of these an output relay and a control relay ANSWER DOWNLOAD EXAMIANS APP
Automation System The "walk-through" method of programming a robot involves: moving the robot from one location to another walking through your suggested procedure with your supervisor prior to programming None of these All of these physically moving the robot through all the motions it is to repeat moving the robot from one location to another walking through your suggested procedure with your supervisor prior to programming None of these All of these physically moving the robot through all the motions it is to repeat ANSWER DOWNLOAD EXAMIANS APP
Automation System In pen plotters, "resolution" refers to the shortest possible line, but in electrostatic plotters it refers to: how accurately the plotter returns to a specific point None of these the number of dots per inch dual-axis tracking the speed per inch how accurately the plotter returns to a specific point None of these the number of dots per inch dual-axis tracking the speed per inch ANSWER DOWNLOAD EXAMIANS APP
Automation System If the present value in a timer in the TI510 is 8, how many milliseconds is required from the time the timer is started until the output is enabled? 18 None of these 133.36 1275.41 149.88 18 None of these 133.36 1275.41 149.88 ANSWER DOWNLOAD EXAMIANS APP
Automation System A favourable reason for automation is to: raises assembly cost increase number of operations None of these perform difficult operations decrease throughput raises assembly cost increase number of operations None of these perform difficult operations decrease throughput ANSWER DOWNLOAD EXAMIANS APP