Stoichiometry The viscosity of water at room temperature may be around one Poise Both B & C Centipoise Stoke Poise Both B & C Centipoise Stoke ANSWER DOWNLOAD EXAMIANS APP
Stoichiometry Pure aniline is evaporating through a stagnant air film of 1 mm thickness at 300 K and a total pressure of 100 KPa. The vapor pressure of aniline at 300 K is 0.1 KPa. The total molar concentration under these conditions is 40.1 mole/m³ . The diffusivity of aniline in air is 0.74xl0⁻⁵m²/s.The numerical value of mass transfer co-efficient is 7.4 x 10⁻³. The rate of evaporation of aniline is 2.97 x 10⁻⁴. Its units are Mole/cm². s Mole/m² . s Mole/s Kmole/m² . s Mole/cm². s Mole/m² . s Mole/s Kmole/m² . s ANSWER DOWNLOAD EXAMIANS APP
Stoichiometry Sometimes, in chemical processes, a part of the outlet stream is rejected as waste in order to keep the impurity level in the system within limits. This phenomenon is termed as the Recycling Bypassing Recirculation Purging Recycling Bypassing Recirculation Purging ANSWER DOWNLOAD EXAMIANS APP
Stoichiometry The boiling points for pure water and pure toluene are 100°C and 110.6°C respectively. Toluene and water are completely immiscible in each other. A well agitated equimolar mixture of toluene and water are prepared. If, at a total pressure of one standard atm. exerted by the vapours of water and toluene, the mole fraction of water Xw in the vapour phase satisfies Xw = 0.5 0 < Xw < 0.5 0.5 < Xw < 1.0 Xw = 1.0 Xw = 0.5 0 < Xw < 0.5 0.5 < Xw < 1.0 Xw = 1.0 ANSWER DOWNLOAD EXAMIANS APP
Stoichiometry A vessel of volume 1000 m³ contains air which is saturated with water vapour. The total pressure and temperature are 100 kPa and 20°C respectively. Assuming that the vapour pressure of water at 20°C is 2.34 kPa, the amount of water vapour (in kg) in the vessel is approximately 20 34 25 17 20 34 25 17 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS