Mass Transfer
The term "approach" in a cooling tower refers to the difference in the temperature of the

None of these
Hot water entering the tower and the wet bulb temperature of the surrounding air
Hot water entering and the cooled water leaving the cooling tower
Cold water leaving the tower and the wet bulb temperature of the surrounding air

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
When the solvent dissolves very little of solute, then

Solvent of low freezing point should be used
Solvent of low latent heat of vaporisation should be used
Large quantity of solvent is required to extract the solute
Very small quantity of solvent is required

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
A 25 cm x 25 cm x 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m x 1m x 1cm flat sheet of the same material is to be dried from one side only.Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is

2500
1500
1000
2000

ANSWER DOWNLOAD EXAMIANS APP

Mass Transfer
The rate of solid-liquid extraction is limited by the

All of these
Diffusion of the solute through the solvent in the pores to the outside of the particle
Phase change of the solute as it dissolves in the solvent
Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution

ANSWER DOWNLOAD EXAMIANS APP