Measurement and Instrumentation The smallest change in measured variable to which instrument will respond is precision. resolution. sensitivity. accuracy. precision. resolution. sensitivity. accuracy. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation What is the standard unit for length ? Inch Meter Centimeter Kilometer Inch Meter Centimeter Kilometer ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC A-h meter is rated for 15 A, 250 V. The meter constant is 14.4 A-sec/rev. The meter constant at rated voltage may be expressed as 3600 rev/KWh. 960 rev/KWh. 3750 rev/KWh. 1000 rev/KWh. 3600 rev/KWh. 960 rev/KWh. 3750 rev/KWh. 1000 rev/KWh. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The maximum percentage error in the sum of two voltage measurements when V1 = 100V ± 1% and V2 = 80V ± 5% is ± 3% ± 4% ± 2.8% ± 6% ± 3% ± 4% ± 2.8% ± 6% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation It can be stated that CT operates at almost the same flux density as a PT CT operates with considerably lower flux density than a PT CT operates with a higher flux density than PT No generalisation can be made with regard to the flux densities in CT and PT CT operates at almost the same flux density as a PT CT operates with considerably lower flux density than a PT CT operates with a higher flux density than PT No generalisation can be made with regard to the flux densities in CT and PT ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A galvanometer with a full scale current of 10 mA has a resistance of 1000 Ω. The multiplying power (the ratio of measured current to galvanometer current) of 100 Ω shunt with this galvanometer is 10. 100. 110. 11. 10. 100. 110. 11. ANSWER DOWNLOAD EXAMIANS APP