Measurement and Instrumentation The rectifier instrument is not free from Temperature error Wave shape error Frequency error All of the listed here Temperature error Wave shape error Frequency error All of the listed here ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Kelvin’s double bridge is used to measure low resistance because it has high sensitivity. there is no thermo electric emf. resistance variation due to temperature. effect of contact and lead resistance is eliminated. it has high sensitivity. there is no thermo electric emf. resistance variation due to temperature. effect of contact and lead resistance is eliminated. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An induction wattmeter can be used for Any of the listed here Dc only Both DC and AC Ac only Any of the listed here Dc only Both DC and AC Ac only ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which one of the following meters has maximum loading effect on the circuit under measurement ? 10 MΩ/volt 1000 Ω/volt 100 Ω/volt 1 MΩ/volt 10 MΩ/volt 1000 Ω/volt 100 Ω/volt 1 MΩ/volt ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging One of the wattmeters will read zero Pressure coil of the wattmeter will become ineffective. One of the wattmeter connections will have to be reversed Both give the same readings One of the wattmeters will read zero Pressure coil of the wattmeter will become ineffective. One of the wattmeter connections will have to be reversed Both give the same readings ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In the bridge given in the figure, the reading of the high impedance voltmeter is 6.66 V. - 3.33 V. Zero. 4.20 V. 6.66 V. - 3.33 V. Zero. 4.20 V. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS