Mass Transfer The minimum number of theoretical plates is required for achieving a given separation in distillation column with Total reflux Minimum reflux ratio No reflux Zero reflux ratio Total reflux Minimum reflux ratio No reflux Zero reflux ratio ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In the layout plan for a vacuum distillation unit, operating at 60 mm Hg, supported by a barometric condenser, the appropriate place for the location of vacuum drum for collecting the distillate will be 2 metres above the ground 5 metres above ground 10 metres above ground At ground level 2 metres above the ground 5 metres above ground 10 metres above ground At ground level ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, Composition of vapors and that of liquid do not vary throughout the column The top and bottom compositions are unchanged with and without total reflux Reboiler load and condenser load are minimum The top and bottom compositions correspond to the maximum enrichment available Composition of vapors and that of liquid do not vary throughout the column The top and bottom compositions are unchanged with and without total reflux Reboiler load and condenser load are minimum The top and bottom compositions correspond to the maximum enrichment available ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Dry bulb temperature of unsaturated air is more than its __________ temperature. Neither A nor B Both A & B Dew point Wet bulb Neither A nor B Both A & B Dew point Wet bulb ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer With increase in temperature, the leaching rate increases due to Increased diffusivity Neither A nor B Both A & B Decreased liquid viscosity Increased diffusivity Neither A nor B Both A & B Decreased liquid viscosity ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is ∞ +ve -ve ∞ +ve -ve ANSWER DOWNLOAD EXAMIANS APP