Applied Mechanics and Graphic Statics The member forces in a statically in determinate truss Cannot be obtained by graphic statics Can be obtained by graphic statics by trial and error May be obtained by graphic statics Can be obtained by graphic statics Cannot be obtained by graphic statics Can be obtained by graphic statics by trial and error May be obtained by graphic statics Can be obtained by graphic statics ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics The ratio of the speed of a rolling cylinder to the speed of sliding cylinder is Less than 1 Equal to 1 Between 1 and 2 Greater than 2 Less than 1 Equal to 1 Between 1 and 2 Greater than 2 ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A weight ‘W’ is suspended at the free end of a light member hinged to a vertical wall. If the angle of inclination of the member with the upper wall is θ°, the force introduced in the member, is W cosec θ W cos θ W sec θ W sin θ W cosec θ W cos θ W sec θ W sin θ ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics For a given velocity of a projectile, the range is maximum when the angle of projection is 45° 90° 30° 0° 45° 90° 30° 0° ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics The maximum velocity of a body vibrating with a simple harmonic motion of amplitude 150 mm and frequency 2 vibrations/sec, is 0.18845 m/sec 1.885 m/sec 18.85 m/sec 188.5 m/sec 0.18845 m/sec 1.885 m/sec 18.85 m/sec 188.5 m/sec ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A 2 m long ladder rests against a wall and makes an angle of 30° with the horizontal floor. Where will be the instantaneous center of rotation when the ladder starts slipping ?i. 1.0 in from the wallii. 1.732 m from the walliii. 1.0 m above the flooriv. 1.732 m above the floorThe correct answer is (ii) and (iv) (ii) and (iii) (i) and (iii) (i) and (iv) (ii) and (iv) (ii) and (iii) (i) and (iii) (i) and (iv) ANSWER DOWNLOAD EXAMIANS APP