Manufacturing And Production Technology The lathe spindles are usually made hollow and provided with External taper Internal and external taper No taper Internal taper External taper Internal and external taper No taper Internal taper ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The tool life is said to be over if There is sudden increase in cutting forces and power consumption Poor surface finish is obtained All of these Overheating and fuming due to heat of friction starts There is sudden increase in cutting forces and power consumption Poor surface finish is obtained All of these Overheating and fuming due to heat of friction starts ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Cutting fluids are used to Cool the workpiece Cool the tool Improve surface finish All of these Cool the workpiece Cool the tool Improve surface finish All of these ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The grinding wheel speed (surface speed in m/min) usually varies from 1500 to 2000 2000 to 2500 1000 to 1500 500 to 1000 1500 to 2000 2000 to 2500 1000 to 1500 500 to 1000 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The lip angle is the angle Between the tool face and the ground end surface of flank Between the face of the tool and a line tangent to the machined surface at the cutting point None of the listed here Made by the face of the tool and the plane parallel to the base of the cutting tool Between the tool face and the ground end surface of flank Between the face of the tool and a line tangent to the machined surface at the cutting point None of the listed here Made by the face of the tool and the plane parallel to the base of the cutting tool ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Relief angles on high speed steel tools usually vary from 3° to 10° 10° to 20° 0° to 3° 20° to 30° 3° to 10° 10° to 20° 0° to 3° 20° to 30° ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS