Manufacturing And Production Technology The cutting tool in a milling machine is mounted on Spindle Knee Column Arbor Spindle Knee Column Arbor ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In oblique cutting of metals, the cutting edge of the tool is Inclined at an angle less than 90° to the direction of tool travel Perpendicular to the workpiece Parallel to the direction of tool travel Perpendicular to the direction of tool travel Inclined at an angle less than 90° to the direction of tool travel Perpendicular to the workpiece Parallel to the direction of tool travel Perpendicular to the direction of tool travel ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Surface grinding is done to produce All of the listed here Flat surface Tapered surface Internal cylindrical holes All of the listed here Flat surface Tapered surface Internal cylindrical holes ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Which of the following statement is wrong as regard to down milling? The surface milled appears to be slightly wavy. The coolant can be poured directly at the cutting zone where the cutting force is maximum. The chips are disposed off easily and do not interfere with the cutting. It can not be used on old machines due to backlash between the feed screw of the table and the nut. The surface milled appears to be slightly wavy. The coolant can be poured directly at the cutting zone where the cutting force is maximum. The chips are disposed off easily and do not interfere with the cutting. It can not be used on old machines due to backlash between the feed screw of the table and the nut. ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Stellite preserves hardness up to a temperature of 900°C 1100°C 500°C 350°C 900°C 1100°C 500°C 350°C ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 26.56 20.56 36.56 30.56 26.56 20.56 36.56 30.56 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS