Workshop Technology The binder commonly used in making oil sand, is Clay type binder Inorganic type binder Any one of the listed here Organic type binder Clay type binder Inorganic type binder Any one of the listed here Organic type binder ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology When a hole or cavity to be cored is not in line with the parting surface, then a ________ is used. Drop core Horizontal core Vertical core Balanced core Drop core Horizontal core Vertical core Balanced core ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For gas welding, the pressure desired at the welding torch for acetylene is 280 to 560 kN/m² 7 to 103 kN/m² 560 to 840 kN/m² 70 to 280 kN/m² 280 to 560 kN/m² 7 to 103 kN/m² 560 to 840 kN/m² 70 to 280 kN/m² ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The material which can be best cut with oxygen cutting process is Brass Mild steel Copper Aluminium Brass Mild steel Copper Aluminium ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The temperature of the inner luminous cone of neutral flame is about 1000°C 2100°C 3200°C 1250°C 1000°C 2100°C 3200°C 1250°C ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness more than 12.5 mm, its edges Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Do not require bevelling Should have a double-V or U-groove on one side Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Do not require bevelling Should have a double-V or U-groove on one side ANSWER DOWNLOAD EXAMIANS APP