Measurement and Instrumentation The best type of meter moment is ______ moment. None of the listed here Dynamometer Iron- vane D'Arsonval None of the listed here Dynamometer Iron- vane D'Arsonval ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a wheatstone bridge, a change of 6 Ω in the unknown arm of bridge is required to produce a change in deflection of 2.4 mm of the galvanometer. The sensitivity is 2.5 mm/Ω 0.8 mm/Ω 0.4 mm/Ω 5.0 mm/Ω 2.5 mm/Ω 0.8 mm/Ω 0.4 mm/Ω 5.0 mm/Ω ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistor of 10kΩhms with 5% tolerance is connected in parallel with a 5kΩhms resistor of 10% tolerance. What is the tolerance limit for the parallel network? 10% 5% 8.33% 6.67% 10% 5% 8.33% 6.67% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The limiting errors of measurement of power consumed by and the current passing through a resistance are ±1.5% and ±1% respectively. What is the limiting error ( in %) of measurement of resistance ? ± 1% ±3.5% ± 1.5% ± 2.5% ± 1% ±3.5% ± 1.5% ± 2.5% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sampling wattmeter is used to measure the average power of a load. The peak to peak voltage of a square wave is 10 V and the current is triangular wave of 5 Amp P-P as shown in the figure. The period is 20 ms. The reading in W will be 50 W. 0 W. 100 W. 25 W. 50 W. 0 W. 100 W. 25 W. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A first order instrument is characterized by Static sensitivity and time constant Time constant only Static sensitivity and damping coefficient Static sensitivity, damping coefficient and natural frequency of oscillations Static sensitivity and time constant Time constant only Static sensitivity and damping coefficient Static sensitivity, damping coefficient and natural frequency of oscillations ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS