PERT analysis is based on All listed here Pessimistic time Optimistic time Most likely time TRUE ANSWER : ? YOUR ANSWER : ?
Consider the following statements:In the bar chart planning<br/>1. Interdependence of the operations cannot be portrayed.<br/>2. Progress of work can be measured.<br/>3. Spare time of the activities can be determined.<br/>4. Schedule cannot be updated. 1 and 4 are correct 1, 2 and 4 are correct 2, 3 and 4 are correct 1, 2 and 3 are correct TRUE ANSWER : ? YOUR ANSWER : ?
If the expected time of completion of a project is 60 weeks with a standard deviation of 5 weeks, the probability of completing the project in 50 weeks and 65 weeks respectively will be 97.7% and 84.1% 97.7 % and 15.9% 15.9% and 97.7% 2.3% and 84.1% TRUE ANSWER : ? YOUR ANSWER : ?
An earth moving equipment costs Rs. 5,00,000 and has an estimated life of 10 years and a salvage value of Rs. 50,000. What uniform annual amount must be set aside at the end of each of the 10 years for replacement if the interest rate is 8% per annum and if the sinking fund factor at 8% per annum interest rate for 10 years is 0.069? Rs. 31050 Rs. 50000 Rs. 37950 Rs. 34500 TRUE ANSWER : ? YOUR ANSWER : ?
Consider the following activities in a building construction:1. Concreting of roof slabs2. Brick-jelly lime concrete terracing3. Erection of form work for slab4. Construction of parapet wall in terraceThe correct sequence of these activities is 1, 3, 4, 2 1, 3, 2, 4 3, 1, 4, 2 3, 1, 2, 4 TRUE ANSWER : ? YOUR ANSWER : ?
A machine is purchased for Rs. 10,000,00 and has an estimated life of 10 years. The salvage value at the end of 10 years is Rs. 1,50,000. The book value of the machine at the end of 5 years using general straight line method of evaluation of depreciation is Rs. 5,75,000 Rs. 6,50,000 Rs. 8,50,000 Rs. 4,75,000 TRUE ANSWER : ? YOUR ANSWER : ?
The area under the Beta distribution curve is divided into two equal parts by Expected time Pessimistic time Optimistic time Most likely time TRUE ANSWER : ? YOUR ANSWER : ?
Batching refers to Weighing accurately, the quantity of each material for a job before mixing Controlling the total quantity at each batch Adjusting the water to be added in each batch according to the moisture content of the materials being mixed in the batch Controlling the quantity of each material into each batch TRUE ANSWER : ? YOUR ANSWER : ?
Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? Asphalt Loose sand Concrete Firm earth TRUE ANSWER : ? YOUR ANSWER : ?
Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than Independent Float 1 and 4 are correct 1 and 2 are correct 2 and 3 are correct 1 and 4 are correct TRUE ANSWER : ? YOUR ANSWER : ?