Power Systems Plug setting of a relay can be altered by varying none of these. air gap of magnetic path. no. of ampere-turns. adjustable back up stop. none of these. air gap of magnetic path. no. of ampere-turns. adjustable back up stop. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the diameter of the conductor is increased no change in inductance and resistance the inductance is increased the resistance is increased the inductance is decreased no change in inductance and resistance the inductance is increased the resistance is increased the inductance is decreased ANSWER DOWNLOAD EXAMIANS APP
Power Systems If R = 84 ohm/Km, G = 10-6 mho/Km, H = 0.01 H/Km, C = 0.061 μ F/Km and frequency = 1000 Hz, then what is the value of propagation constant of the transmission line None of them. 0.01 + j 0.02 per Km. 0.09 + j 0.018 per Km. 0.018 per Km. None of them. 0.01 + j 0.02 per Km. 0.09 + j 0.018 per Km. 0.018 per Km. ANSWER DOWNLOAD EXAMIANS APP
Power Systems For some given transmission line the expression for voltage regulation is given by (Vs - Vr)/Vr *100%. Hence, None of these this may either be a medium line or short line this must be a short line this expression is true for any line None of these this may either be a medium line or short line this must be a short line this expression is true for any line ANSWER DOWNLOAD EXAMIANS APP
Power Systems The incremental fuel costs for two generating units G1 and G2 are given by Ic1 = 25 + 0.2 PG1 and Ic2 = 32 + 0.2 PG2, where PG1 and PG2 are real powers generated by the units. The economic allocation for a total load of 250 MW, neglecting transmission loss, is given by PG1 = 100 MW and PG2 = 150 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 142.5 MW and PG2 = 107.5 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems The steam power plant efficiency can be improved by decreasing the load on the plant. burning large amount of coal. using high temperature and high pressure steam. using large quantity of water. decreasing the load on the plant. burning large amount of coal. using high temperature and high pressure steam. using large quantity of water. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS