Engineering Materials Nodular cast iron is produced by adding ________ to the molten cast iron. Nickel Magnesium Copper Chromium Nickel Magnesium Copper Chromium ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Aluminium bronze contains 10% aluminium and 90% copper 90% magnesium and 9% aluminium with some copper 92.5% aluminium, 4% copper, 2% nickel, and 1.5% Mg 94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe 10% aluminium and 90% copper 90% magnesium and 9% aluminium with some copper 92.5% aluminium, 4% copper, 2% nickel, and 1.5% Mg 94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Admiralty brass used for steam condenser tubes contains copper and zinc in the following ratio 40 : 60 30 : 70 2.1180555555556 2.9375 40 : 60 30 : 70 2.1180555555556 2.9375 ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials In process annealing, the hypo eutectoid steel is Heated from 30°C to 50°C above the upper critical temperature and then cooled suddenly in a suitable cooling medium Heated from 30°C to 50°C above the upper critical temperature and then cooled in still air Heated below or closes to the lower critical temperature and then cooled slowly Heated from 30°C to 50°C above the upper critical temperature and then cooled slowly in the furnace Heated from 30°C to 50°C above the upper critical temperature and then cooled suddenly in a suitable cooling medium Heated from 30°C to 50°C above the upper critical temperature and then cooled in still air Heated below or closes to the lower critical temperature and then cooled slowly Heated from 30°C to 50°C above the upper critical temperature and then cooled slowly in the furnace ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials An example of amorphous material is Glass Zinc Silver Lead Glass Zinc Silver Lead ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Cyaniding is the process of Obtaining cyanide salts Reacting steel surface with cyanide salts Dipping steel in cyanide bath Adding carbon and nitrogen by heat treatment of steel to increase its surface hardness Obtaining cyanide salts Reacting steel surface with cyanide salts Dipping steel in cyanide bath Adding carbon and nitrogen by heat treatment of steel to increase its surface hardness ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS