Measurement and Instrumentation Magnetic deflection is inversely proportional to (Voltage)1.5. (Voltage)-0.5. (Voltage)2. Voltage. (Voltage)1.5. (Voltage)-0.5. (Voltage)2. Voltage. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation If an inductance L is connected in one arm of bridge and resistance R1, R2, R3 in other three arms The bridge can not be balanced. The bridge is balanced for some specified value of R1, R2, R3. The bridge is balanced for some specified value of frequency. The bridge can be balanced. The bridge can not be balanced. The bridge is balanced for some specified value of R1, R2, R3. The bridge is balanced for some specified value of frequency. The bridge can be balanced. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A single phase load is connected between R and Y terminals of a 415 V, symmetrical, 3-phase, 4 wire system with phase sequence RYB. A wattmeter is connected in the system as shown in figure. The power factor of the load is 0.8 lagging. The wattmeter will read - 795 W. - 597 W. + 795 W. + 597 W. - 795 W. - 597 W. + 795 W. + 597 W. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation With a sweep time 10ms across the screen the approx. horizontal sawtooth frequency will be 500Hz 100Hz 50Hz 1kHz 500Hz 100Hz 50Hz 1kHz ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In flux meter, the controlling torque is produced by weight attached to the moving coil. spring. crossed coil mechanism. not provided at all. weight attached to the moving coil. spring. crossed coil mechanism. not provided at all. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An instrument to be used for measurement and control should preferably have Non-linear output Linear output and fast response Dead zone and dead time A highly damped response Non-linear output Linear output and fast response Dead zone and dead time A highly damped response ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS